source: www.youthwork-practice.com | 2000 Games, Devotions, Themes, Ideas and more for Youth Work
only for private using

Sticky-tape Dispenser

Either print out the templates on the following sides or create your own. Saw all of the pieces and build together.

On to the base plate I glued a square piece of wood with a width of 180mm. this wood holds the side walls and gives the correct distance for the dispenser. For tearing the sticky tape I used a metal saw blade, which has been cut to size using a bolt cutter.

The saw blade is then placed into an upright piece of wood; which has previously been sawn with a jigsaw. The saw blade should protrude approximately 2mm out of the wood.

A piece of plastic from a yoghurt pot or something similar is then attached behind the saw blade. This should be approx. 1 cm long and serves the purpose of holding the sticky tape in place after being cut, and also to ensure that the roll does not move back.